FUTURO Swiss Mountain collection

Swiss Mountain Structure, the ergonomic handle of FUTURO tools

FUTURO reversible ratchets, spinner handle and torque wrench share the same two-component 2K handle, faceted like an Alpine ridge. It guides the hand, transmits force and keeps its grip, even with oily or wet hands.

A handle shaped like an Alpine ridge

The Swiss Mountain structure takes its facets from the Swiss peaks. Each surface gives the palm and fingers a different support point: the hand finds its position without searching, and the tool stays in place under load.

Manche Swiss Mountain Structure d'un cliquet FUTURO : facettes bi-matière 2K et bague jaune
  1. 01
    Swiss Mountain facetsSoft edges that stop the tool rotating in the hand and naturally guide the grip.
  2. 02
    Two-component 2K materialA rigid core for force transmission, a soft, non-slip surface for comfort.
  3. 03
    FUTURO-marked collarA smooth zone near the head to position the index finger and control every movement precisely.
  4. 04
    Signature yellow ringThe FUTURO visual marker: the tool is recognised and found at a glance in the case.

Ergonomics

The benefits of the Swiss Mountain grip

Grip in oily or wet conditions

The 2K surface and its facets keep their grip when hands are oily or wet, in the workshop and on site.

Optimal force transmission

The handle does not turn in the palm: the torque you apply goes into the screw, not into a slipping hand.

Comfort over time

Support spread over several surfaces avoids pressure points and makes repeated tightening more comfortable.

A recognisable design

One signature across the whole collection: reversible ratchets, spinner handle and torque wrench form a consistent range.

The Swiss Mountain collection

Three professional hand tools, one handle: reversible ratchet, spinner handle and electronic torque wrench. Available from FUTURO retailers and, for the ratchets, included in the FUTURO professional kits.

Cliquet réversible FUTURO à poignée Swiss Mountain Structure

1/4" · 1/2" · Ref. 426960 / 428430

Reversible ratchet

  • Fine 72-tooth mechanism, 5° return angle
  • 1/4″ (153 mm) and 1/2″ (270 mm) versions
  • Chrome vanadium steel, satin chrome finish
  • 2K Swiss Mountain Structure handle and integrated NFC chip
Porte-douille FUTURO 1/4" à poignée Swiss Mountain Structure, réf. 426965

1/4" · Ref. 426965

1/4" spinner handle

  • 160 mm long, 1/4″ square drive
  • Handle collar for a 19 mm wrench: extra torque
  • Cross hole for a sliding T-bar or screwdriver blade
  • 2K Swiss Mountain Structure handle and integrated NFC chip
Clé dynamométrique électronique FUTURO 3/8" à poignée Swiss Mountain Structure

3/8" · 10 – 50 Nm

Electronic torque wrench

  • 10 to 50 Nm range, ±2 % accuracy (clockwise), DIN EN ISO 6789
  • 2″ TFT display, visual, audible and vibration alerts
  • Integrated reversible ratchet, Bluetooth and mobile app
  • 2K Swiss Mountain Structure handle

FUTURO quality

Performance loves perfection.

Behind the handle are tools designed for professionals: selected steels, careful finishing and precise mechanisms, developed by Brütsch/Rüegger in Switzerland.

Chrome vanadium steel

Strength and durability, with a satin chrome finish that protects against corrosion.

Precise mechanisms

A fine 72-tooth mechanism and a 5° return angle for efficient work, even with little swing room.

A Swiss brand

FUTURO is the premium brand of Brütsch/Rüegger Tools AG in Urdorf, a partner to workshops and industry.

Find Swiss Mountain tools in our professional kits

The XL, L and M cases combine Swiss Mountain ratchets, sockets and bits in custom-cut foam.

Frequently asked questions about the Swiss Mountain handle

It is the two-component 2K handle developed by FUTURO. Its faceted surface, inspired by the Swiss Alps, improves grip and force transmission, even with oily or wet hands.

The collection includes the 1/4″ reversible ratchet (ref. 426960), the 1/2″ reversible ratchet (ref. 428430), the 1/4″ spinner handle (ref. 426965) and a 3/8″ electronic torque wrench from 10 to 50 Nm. The ratchets are also part of the FUTURO socket sets in the XL, L and M cases.

Yes. The 2K coating and the facets are designed to keep a secure grip when hands are oily or wet.

With 72 teeth, the return angle of FUTURO ratchets is only 5°: the ratchet stays effective in confined spaces where hand movement is limited.

The NFC chip gives access to digital product information from a smartphone and makes the tool easier to identify.

Yes, the FUTURO XL, L and M professional cases contain reversible ratchets with the Swiss Mountain Structure handle.

From authorised FUTURO retailers and on the Brütsch/Rüegger Tools AG ToolShop, brw.ch.

Get to grips with the Swiss Mountain collection

Try the handle at a FUTURO retailer near you.

Scroll to Top